Skip to content
Home » How to remove a kitchen faucet?

How to remove a kitchen faucet?

How to remove a kitchen faucet?

A kitchen faucet is a small mechanical device that allows water to flow from the sink. These devices have evolved significantly over time, but they still maintain many of their basic principles. So now you are wondering How to remove a kitchen faucet?

The modern kitchen faucet consists of three parts: a spout, which serves as an outlet for water; a handle, which controls how much water comes out; and a valve, which regulates pressure inside and outside the pipe system itself.

The first faucets were made by hand in medieval times. They consisted of two pieces of wood joined together with glue and then covered in cloth or leather to prevent leakage; these early designs could only provide cold running water because there was no way to control temperature at all!

By contrast, modern kitchen faucets are manufactured using high-tech machinery such as CNC (Computer Numerical Control )

Things You’ll Need – To Remove a Kitchen Faucet

In this section, we’ll walk you through all of the tools and supplies you’ll need to remove your kitchen faucet.

You’ll need:

  • 1/2 or 3/8 inch “open end” wrench
  • Phillips head screwdriver
  • Flat head screwdriver
  • Adjustable wrench

Other Instruments:

1. Plumber’s tape

2. Set of pliers, including a basin wrench and a groove-joint pliers.

3. Bucket to contain water or any other fluids that may be leaked or spilled during the process.

4.  Hammer for safety purposes, in case of any unexpected accidents.

5. Disposable nitrile gloves for protection from the water, and to keep your hands clean from germs and bacteria.

6. Paper towels or rags to wipe off the faucet and surrounding area, as well as for cleaning up any messes.

Important Consideration You Need to Know

You should know these thing to remove a faucet professionally.

1. Turn off the water supply under the sink by closing the valve handles.

2. Use a wrench to disconnect the faucet supply lines from the shutoff valves and position them out of the way.

3. Unscrew the nuts that attach the faucet to the sink using an adjustable wrench.

4. Remove the faucet, including all parts—the spray hose, aerator and mounting nuts—from under the sink.

5. Lay out all of the parts on a piece of newspaper in order to make sure you have everything you need for installation when you purchase your new faucet.

The Best Way to Remove a Kitchen Faucet – Step by Step 

The faucet is one of the most important parts of your kitchen. You might need to remove it for a variety of reasons.

You may want to remove kitchen faucet in order to install a new one, or for maintenance purposes. Whatever the reason might be, you must know how to remove a kitchen faucet.

Removing your kitchen faucet may seem difficult at first, but once you get the hang of it, it’s actually pretty easy.

Here is a step by step process you can follow when removing your kitchen faucet:

Before you get started, you’ll need to make sure you have the following tools:

  • Basin wrench
  • An adjustable wrench
  • A flathead screwdriver to remove the handle
  • A hex socket wrench

Now that you’ve got the tools, follow these steps to remove your kitchen faucet:

1. Turn off the water supply valves under your sink. Drain any remaining water by turning on the faucet until it runs dry.

2. Remove the faucet’s handles and decorative caps, if present, with a flathead screwdriver.

3. Place a basin wrench on each of the nuts holding the faucet in place and turn them counterclockwise to loosen and remove them.

4. Pull out your old faucet from its mounting hole at an angle so that it doesn’t get stuck. If this doesn’t work, use an adjustable wrench to carefully unscrew it from its mounting hole.

How to remove a kitchen faucet with sprayer

Removing the kitchen faucet with sprayer is an easy task if you have the right tools and a general understanding of how the fixture works.

Step 1

Turn off the water supply to your kitchen sink. This can be done by shutting off a single valve under the sink, or, if you have no such valve, shutting off the main water supply line to your home.

Step 2

Loosen, then remove the nuts holding the faucet in place. If you do not have a basin wrench, use one of these alternative methods to loosen the nuts.

Step 3

Remove faucet from sink. Keep it out of harm’s way and protected from damage until you’re ready to install your new faucet.

How to remove a kitchen faucet cartridge?

  1. Cut off the water supply to the kitchen sink, and plug the drain with a rag or something similar.
  2. Move under the sink and remove the screws that are holding the cover over the cartridge in place.
  3. Remove the cover, and pull out any loose washers or screws you find.
  4. Use a wrench to loosen the brass nut that holds the cartridge in place, and pull it out.
  5. Replace it with a new cartridge, tighten down the brass nut with your wrench, then replace all of the other parts you removed in reverse order.

How to remove a kitchen faucet from the top?

Turn off the faucet and make sure that no water is coming out of it

1. Disassemble the top of the faucet by unscrewing nuts, bolts, and screws.

2. Remove the top of the faucet from the pipe underneath it.

3. Place a towel over the drain to prevent any small parts from falling down it.

4. Turn off the water supply to the faucet by turning shutoff valves under the sink counterclockwise (usually located under the kitchen sink).

5. Unscrew an aerator nut at the end of a faucet spout (if there isn’t one, skip this step).

6. Locate mounting nuts that hold a faucet in place and loosen them; you may need channel pliers or basin wrenches to reach these nuts because they are usually located under a sink counter or inside a cabinet.

7. Pull out a faucet from its opening.

How do I remove a stuck faucet?

How to Remove a Stuck Faucet:

  • Turn off the water supply.
  • Unscrew the decorative caps on either side of the faucet, then use an Allen wrench to loosen the bolts that hold the spout in place.
  • Pull out and set aside the spout.
  • Loosen the nuts holding the washers to each valve, then remove them and set them aside.
  • Remove any buildup from the valves with a clean cloth and white vinegar, then replace the washers, tighten the nuts, and reattach all other parts.


You’ve now got the tools and information you need to replace your kitchen faucet. With our handy guide, we hope you’ve saved your home from water damage and your wallet from a plumber’s fee. Good luck!

Just remember what the steps are: turn off the water supply, disconnect the supply lines, remove the nuts holding down the faucet, unplug the sprayer hose, remove any mounting nuts if you have them, and pull out the faucet.

Once it’s out of place, take it to your local hardware store or contact your plumbing company to see if they can recycle it for you. After that’s done, reverse these steps with your new faucet.

1 thought on “How to remove a kitchen faucet?”

  1. Pingback: How To Install Kitchen Faucet? -

Leave a Reply

Your email address will not be published.